EasySplicer Pricing

Clad Alignment V-groove Fusion Splicer 


FiberOptic Resale on Twitter
FiberOptic Resale Facebook Page

EasySplicer - EZ7

Fiber Cleaver - C7
AC Adapter
Hand Stripper
(2) 250um Fiber Holders
(2) 900um Fiber Holders
Cary Case

Easysplicer kit contents

FiberOptic Resale Corp © ALL RIGHTS RESERVED. 

The FORC-EZ7 Splicer Is Small In Size But Big In Value At Only $1875 

 Perfect for FTTH Installations and more...

           EasySplicer FORCE-EZ7 Splicer Specs 

EasySplicer EZ7

This splicer is fast, rugged and designed for field use. Save time and keep costs down with the EasySplicer.

The EasySplicer FORC-EZ7 from FiberOptic Resale is the newest fusion splicer on the market.  The EasySplicer is recommended for FTTH installers, fiber installers, electrical contractors, training schools and more. The EasySplicer is simple to use and weights in at only 1.4 pounds / (3.9 x 9.1 x 2.3 in) with a splice time of under 7 seconds. It has the industry's only SD port for unlimited data storage.

​The EasySplicer is constantly calibrating itself for environmental changes, like moisture. Calibration can also be performed manually and is easily done within seconds. To make perfect splices calibrate before the start of each work day. 

The EasySplicers FORC-EZ7 V-grove SM and MM splicer has the same splicing method as a ribbon splicer which allows the splicer to keep its size small and cost low. Although the EasySplicer FORC-EZ7 is one of the most inexpensive splicers on the market its performs 4-5 times better than more expensive splicers.

  • Splicing method: V-grove cladding alignment
  • Fiber Types: SMF, MMF 50/125 um fiber, 250 µm primary and 900 µm            secondary coated fiber.
  • Fiber Handling: Fiber holders, 2 pairs (250 and 900)
  • Splice Programs: 2 pre-defined. SMF & MMF
  • Typical splice Loss: 0.03dB SMF, 0.01dB MMF
  • Typical Cycle time: 7s + 35s (splice cycle+ oven cycle)
  • Sleeve Dimensions: Max 64mm length, 2-5mm diameter supported by            oven.
  • Communication: USB, mini usb plug.
  • Memory: Internal 1MB, External SD-Card
  • Monitor: LCD, color, 2,8", 320×240 pixels
  • Magnification: Camera 140x
  • Operating Environment: 0-40°C, max 95% RH, non-condensing
  • Weight: 1.4 lbs
  • Power Sources: External power supply, 6V, 1.25A, 100-240VAC 50-60Hz,        Build in Li-Ion battery pack
  • Splicing Capacity: 60 splicing cycles
  • Additional Features: Loss estimation, Fiber fault detection, SD-card for            logging etc.

The newest splicer on the market


Phone: 877-287-7535

Email: sales@easysplicer-usa.com

  • Unlimited Dat Storage
  • For Singlemode and Multimode Splicer
  • Splice Time of Less Than 7 Seconds
  • Loss Estimation
  • Pull Test of Performed Splices
  • Built in Oven

Easysplicer FORC-EZ7 Features